IDPSFParticleSystem Members

	Name	Description
	AddParticle	Adds a new Particle to the particle system, at the start of the Active Particle List. This new Particle is initialized using the particle system's Particle Initialization Function
	AddParticles	Adds the specified number of new Particles to the particle system. These new Particles are initialized using the particle systems Particle Initialization Function
	AutoInitialize	Virtual function to Initialize the Particle System with default values. Particle system properties should not be set until after this is called, as they are likely to be reset to their default values.
	Destroy	Release all resources used by the Particle System and reset all properties to their default values
	Draw	Draws all of the Active Particles to the Graphics Device
	DrawForced	Draws all of the Active Particles to the Graphics Device, even if the the Particle Systems inherits from DrawableGameComponent. NOTE: If inheriting from DrawableGameComponent and this is called, the Particle System will be drawn twice per frame; once when it is called here, and again when automatically called by the Game object. If not inheriting from DrawableGameComponent, this acts the same as calling Draw().
	InitializeNonSerializableProperties	This function should be called immediately after deserializing a particle system in order to reinitialize the properties that could not be serialized. NOTE: If this type of particle system requires a Texture, this function will attempt to load the Texture specified by the DeserializationTexturePath property. If it is unable to load a texture, a DPSFArgumentNullException will be thrown, so this function should be wrapped in a try block, and when a DPSFArgumentNullException is caught then the particle system's texture should be manually set. NOTE: This will attempt to load the Effect and Technique specified by the DeserializationEffectPath and DeserializationTechniqueName properties. If either of these are null, the DPSFDefaultEffect will be used, and the default Technique for this type of particle system will be loaded.
	RemoveAllParticles	Removes all Active Particles from the Active Particle List and adds them to the Inactive Particle List
	SetCameraPosition	Sets the Camera Position of the particle system, so that the particles know how to make themselves face the camera if needed. This virtual function does not do anything unless overridden, and all it should do is set an internal Vector3 variable (e.g. public Vector3 CameraPosition { get; set; }) to match the given Vector3.
	SetDefaultEffect	Sets the Effect to be the DPSFDefaultEffect, and the Technique to be the default technique for this type of particle system. This is done automatically when the particle system is initialized.
	SetEffectAndTechnique(Effect, String)	Sets the Effect and Technique to use to draw the Particles
	SetEffectAndTechnique(String, String)	Sets the Effect and Technique to use to draw the Particles
	SetTechnique	Set which Technique of the current Effect to use to draw the Particles
	SetTexture	Set the Texture to use to draw the Particles
	SetWorldViewProjectionMatrices	Set the World, View, and Projection matrices for this Particle System.
	Update	Updates the Particle System. This involves executing the Particle System Events, updating all Active Particles according to the Particle Events, and adding new Particles according to the Emitter settings.
	UpdateForced	Updates the Particle System, even if the the Particle Systems inherits from DrawableGameComponent. Updating the Particle System involves executing the Particle System Events, updating all Active Particles according to the Particle Events, and adding new Particles according to the Emitter settings. NOTE: If inheriting from DrawableGameComponent and this is called, the Particle System will be updated twice per frame; once when it is called here, and again when automatically called by the Game object. If not inheriting from DrawableGameComponent, this acts the same as calling Update().

	Name	Description
	AutoMemoryManagerSettings	The Settings used to control the Automatic Memory Manager.
	ClassName	Get the Name of the Class that this Particle System is using. This can be used to check what type of Particle System this is at run-time.
	ContentManager	Get / Set the Content Manager to use to load Textures and Effects.
	DeserializationEffectPath	The path used to load the Effect when the InitializeNonSerializableProperties() function is called. NOTE: This is automatically set when the SetEffectAndTechnique(string, string) function is called.
	DeserializationTechniqueName	The Name of the Technique to use when the InitializeNonSerializableProperties() function is called. NOTE: This is automatically set when the SetEffectAndTechnique() and SetTechnique() functions are called.
	DeserializationTexturePath	The path used to load the Texture when the InitializeNonSerializableProperties() function is called. NOTE: This is automatically set when the SetTexture() function is called.
	DrawOrder	The Order in which the Particle System should be Drawn relative to other DPSF Particle Systems in the same Particle System Manager. Particle Systems are Drawn in ascending order according to their Draw Order (i.e. lowest first)
	Effect	Get / Set the Effect to use to draw the Particles
	Emitter	The Emitter is used to automatically generate new Particles. NOTE: This is just a pointer to one of the ParticleEmitters in the Emitters ParticleEmitterCollection. NOTE: If you set this to a ParticleEmitter that is not in the Emitters collection, it will be added to it. During the particle system Update() this Emitter property is updated to point to the ParticleEmitter in the Emitters collection that is being updated.
	Emitters	The Emitters used to automatically generate new Particles for this Particle System. Each particle system Update() will loop through all Emitters in this collection and add their new particles to this particle system. During the particle system Update() the Emitter property is updated to point to the ParticleEmitter in this collection that is being updated.
	Enabled	Get / Set if this Particle System should Update itself and its Particles or not. NOTE: Setting this to false causes the Update() function to not update anything.
	Game	Get the Game object set in the constructor, if one was given.
	GraphicsDevice	Get the Graphics Device to draw to
	ID	Get the unique ID of this Particle System. NOTE: Each Particle System is automatically assigned a unique ID when it is instantiated.
	InheritsDrawableGameComponent	Get if the Particle System is inheriting from DrawableGameComponent or not. If inheriting from DrawableGameComponent, the Particle Systems are automatically added to the given Game object's Components and the Update() and Draw() functions are automatically called by the Game object when it updates and draws the rest of its Components. If the Update() and Draw() functions are called by the user anyways, they will exit without performing any operations, so it is suggested to include them anyways to make switching between inheriting and not inheriting from DrawableGameComponent seamless; just be aware that the updates and draws are actually being performed when the Game object is told to update and draw (i.e. when base.Update() and base.Draw() are called), not when these functions are being called.
	InternalSimulationSpeed	Get / Set how fast the Particle System Simulation should run to look "normal". 1.0 = normal speed, 0.5 = half speed, 2.0 = double speed. This is provided as a way of speeding up / slowing down the simulation to have it look as desired, without having to rescale all of the particle velocities, etc. This allows you to use the exact same particle system class to create two particle systems, and then have one run slower or faster than the other, creating two different effects. If you then wanted to speed up or slow down both effects (i.e. particle systems), you could adjust the SimulationSpeed property on both particle systems without having to worry about adjusting this property at all to get the effects back to normal speed; just reset the SimulationSpeed property you changed back to 1.0. NOTE: If a negative value is specified, the Internal Simulation Speed is set to zero (pauses the simulation; has the same effect as Enabled = false).
	IsInitialized	Returns true if the Particle System is Initialized, false if not.
	MaxNumberOfParticlesAllowed	Get / Set the Max Number of Particles this Particle System is Allowed to contain at any given time. NOTE: The Automatic Memory Manager will never allocate space for more Particles than this. NOTE: This value must be greater than or equal to zero.
	NumberOfActiveParticles	Get the number of Particles that are currently Active.
	NumberOfParticlesAllocatedInMemory	Get / Set the absolute Number of Particles to Allocate Memory for. NOTE: This value must be greater than or equal to zero. NOTE: Even if this many particles aren't used, the space for this many Particles is still allocated in memory.
	NumberOfParticlesBeingDrawn	Get the number of Particles being Drawn. That is, how many Particles are both Active AND Visible.
	NumberOfParticlesStillPossibleToAdd	Get the number of Particles that may still be added before reaching the Max Number Of Particles Allowed. If the Max Number Of Particles Allowed is greater than the Number Of Particles Allocated In Memory AND the Auto Memory Manager is set to not increase the amount of Allocated Memory, than this returns the number of Particles that may still be added before running out of Memory.
	ParticleSystemManagerToCopyPropertiesFrom	The Particle System Manager whose properties (SimulationSpeed and UpdatesPerSecond) this particle system should follow. NOTE: This Particle System's properties will only clone the Manager's properties if the Manager's properties are Enabled. For example, the Manager's SimulationSpeed will only be copied to this Particle System if the Manager's SimulationSpeedIsEnabled property is true. NOTE: This value is automatically set to the last Particle System Manager this Particle System is added to.
	ParticleType	Get the type of Particles that this Particle System should draw.
	PerformanceProfilingIsEnabled	Get / Set if performance timings should be measured or not, such as how long it takes to perform updates and draws. This should be disabled before building a release version of your application. Note: Performance profiling is not available on the Reach profile, so this will always return False on the Reach profile.
	PerformanceTimeToDoDrawInMilliseconds	Get how long (in milliseconds) it took to perform the last Draw() function call. Returns 0 if Performance Profiling is not Enabled.
	PerformanceTimeToDoUpdateInMilliseconds	Get how long (in milliseconds) it took to perform the last Update() function call. Returns 0 if Performance Profiling is not Enabled.
	Projection	Get / Set the Projection Matrix to use for drawing 3D Particles.
	RandomNumber	Get a Random object used to generate Random Numbers.
	RenderProperties	Get the render properties used to draw the particles.
	SimulationSpeed	Get / Set how fast the Particle System Simulation should run. 1.0 = normal speed, 0.5 = half speed, 2.0 = double speed. NOTE: If a negative value is specified, the Speed Scale is set to zero (pauses the simulation; has same effect as Enabled = false).
	SpriteBatch	Returns the SpriteBatch used to draw the Sprite particles. NOTE: If this is not a Sprite particle system, this will return null.
	SpriteBatchSettings	The Sprite Batch drawing Settings used in the Sprite Batch's Begin() function call. NOTE: These settings only have effect if this is a Sprite particle system.
	Technique	Get / Set which Technique of the current Effect to use to draw the Particles
	Texture	Get / Set the Texture to use to draw the Particles
	TotalNumberOfActiveParticles	Get the number of particles that are currently Active, in both this particle system and any particle systems contained within this one. NOTE: Because a particle system may contain other particle systems, this is a virtual function that may be overridden to return the NumberOfActiveParticles for both this particle system and any child particle systems that are contained within this one. NOTE: By default this just returns this particle system's NumberOfActiveParticles.
	TotalNumberOfParticlesAllocatedInMemory	Get the number of particles that memory has been allocated for, for both this particle system and any particle systems contained within this one. NOTE: Because a particle system may contain other particle systems, this is a virtual function that may be overridden to return the NumberOfParticlesAllocatedInMemory for both this particle system and any child particle systems that are contained within this one. NOTE: By default this just returns this particle system's NumberOfParticlesAllocatedInMemory.
	TotalNumberOfParticlesBeingDrawn	Get the number of particles that are being Drawn, in both this particle system and any particle systems contained within this one. NOTE: Because a particle system may contain other particle systems, this is a virtual function that may be overridden to return the NumberOfParticlesBeingDrawn for both this particle system and any child particle systems that are contained within this one. NOTE: By default this just returns this particle system's NumberOfParticlesBeingDrawn.
	Type	Get / Set the Type of Particle System this is.
	UpdateOrder	The Order in which the Particle System should be Updated relative to other DPSF Particle Systems in the same Particle System Manager. Particle Systems are Updated in ascending order according to their Update Order (i.e. lowest first).
	UpdatesPerSecond	Specify how often the Particle System should be Updated. NOTE: Specifying a value of zero (default) will cause the Particle System to be Updated every time the Update() function is called (i.e. as often as possible). NOTE: If the Update() function is not called often enough to keep up with this specified Update rate, the Update function updates the Particle Systems as often as possible.
	UsingExternalSpriteBatchToDrawParticles	Returns if this particle system is dependent on an external Sprite Batch to draw its particles or not. If false, the particle system will use its own SpriteBatch to draw its particles. If true, then you must call SpriteBatch.Begin() before calling ParticleSystem.Draw() to draw the particle system, and then call SpriteBatch.End() when done drawing the particle system, where the SpriteBatch referred to here is the one you passed into the InitializeSpriteParticleSystem() function. NOTE: This property only applies to Sprite particle systems.
	View	Get / Set the View Matrix to use for drawing 3D Particles.
	Visible	Get / Set if this Particle System should Draw its Particles or not. NOTE: Setting this to false causes the Draw() function to not draw anything.
	World	Get / Set the World Matrix to use for drawing 3D Particles.
	WorldViewProjection	Gets the result of multiplying the World, View, and Projection matrices.